WiMiUS P62 PRO Review: the ‘Netflix-ready’ 4K projector that actually feels plug-and-play

I’ve been using the WiMiUS P62 PRO for a couple of weeks as my main “TV” in the living room and sometimes in the bedroom. I bought it mainly because I was tired of messing around with Fire Sticks and cables just to watch Netflix. The fact that this thing is officially licensed by Netflix and has the apps built in was the main reason I picked it over cheaper projectors.

In practice, it really does behave more like a smart TV than a basic projector. You plug it in, connect to Wi‑Fi, log into Netflix/Prime/YouTube, and you’re basically done. I didn’t have to drag out a laptop or HDMI cable once, which is a big change from my old budget projector that was basically just a dumb screen with a loud fan.

My use is pretty mixed: movies at night, some casual PS5 gaming, and kids’ cartoons on weekend mornings with some daylight in the room. I’ve also tried one outdoor session on a white wall in the garden. So this isn’t lab testing, just how it behaves in a normal house with normal annoyances like light leaks, kids touching things, and Wi‑Fi being bad sometimes.

Overall, I’d say it’s a pretty solid mid-range projector with some clever convenience features. It’s not perfect and some things annoyed me (especially a couple of software quirks and the fan noise), but for the price and what it does out of the box, it’s honestly better than I expected. I’ll break it down by how it really performs day to day instead of repeating the marketing numbers.

In terms of value, I’d put the WiMiUS P62 PRO in the “good bang for your buck” category, especially if you specifically want built-in Netflix and strong brightness. There are cheaper 1080p projectors out there, but most of them either lack proper brightness, have no official Netflix, or need a Fire Stick or laptop permanently attached. By the time you add an external streaming device, the price gap isn’t that big anymore.

Compared to a basic budget projector I used before (sub‑£150 range), the improvements are clear: brighter image, better colours, much better speakers, way easier setup, and far less fiddling with focus and keystone. You do pay extra for those things, but in daily use they actually matter. If you watch films regularly, that extra cost feels justified pretty quickly because you’re not fighting with the device every time.

On the other hand, if you compare it to higher-end projectors from big brands like Epson or BenQ, those can have better contrast, lower input lag for gaming, or quieter fans—but they also tend to cost a lot more and often don’t have the same level of integrated streaming out of the box. So it kind of sits in the middle: better than the cheap stuff, not as polished as the premium gear, but priced accordingly.

If you already own a good streaming stick and don’t care about built-in apps, you might find a slightly cheaper 1080p projector that gives similar picture quality. But if you want an all-in-one box you can plug in and instantly watch Netflix, with decent sound and brightness, this one offers good value for money. It’s not the absolute bargain of the century, but for what it does and how easy it is to use, I’d say the price is fair.

Physically, the P62 PRO is reasonably compact: about 25.7 x 20 x 10.3 cm and 1.8 kg. It’s not tiny pico-projector small, but you can move it around the house without feeling like you’re relocating a TV. I’ve used it on a tripod, on a low table, and once on a makeshift shelf, and it didn’t feel awkward in any of those spots. It has different mounting options (ceiling, table, tripod, wall) so you have some flexibility.

The design is fairly simple: black plastic body, lens on the front, ventilation grills on the sides, ports at the back. It looks decent enough to leave in the living room without screaming “cheap gadget”. One thing I did like is that the lens feels a bit more protected than on my old projector; dust doesn’t build up as fast, and I’m not constantly wiping it. The buttons on top are basic but functional—most of the time I just use the remote though.

On the downside, port placement is all on the back, which is okay for a more permanent setup, but when you’re moving it from room to room and constantly plugging in HDMI or USB sticks, it gets a bit fiddly if it’s close to a wall. A side HDMI port would have been more convenient. Also, the power cable isn’t super long, so depending on your room layout you might end up using an extension lead.

In terms of noise, the fan is noticeable. In quiet scenes you can hear it, especially if you’re sitting close to the projector. It’s not jet-engine loud, but it’s not silent either. Once the movie gets going and the sound kicks in, I mostly stop noticing it, but during menus or quiet dialogue you’re aware it’s there. Overall, design is practical rather than fancy: it looks fine, it’s easy to carry, and it fits on a regular projector stand without fuss. A couple of small tweaks (longer cable, side port, quieter fan) would make it better, but nothing here is a deal-breaker.

From a daily comfort point of view, the P62 PRO is much nicer to live with than basic projectors. The AI auto focus, auto keystone, and screen fit actually make a difference. I move it between the living room and bedroom a lot. Each time I plonk it down, it does its little calibration routine and sorts out focus and alignment by itself. I’d say 8 times out of 10, the result is good enough that I just leave it. The other times I might tweak focus or keystone a bit manually, but it’s still much faster than doing everything from scratch.

The built-in Dolby Audio + dbx‑tv speakers are better than I expected. For a small to medium room, the sound is clear and loud enough that you don’t feel forced to add external speakers right away. Dialogue is understandable, and effects in action scenes have some punch. It’s not home cinema amp level, but for casual use it’s perfectly fine. Outdoors, the sound carries well enough for a family movie night, although I’d probably add a Bluetooth speaker if you’ve got a lot of background noise.

The main downside for comfort is the fan noise. It’s not unbearable, but you’ll notice it if the projector is close to you. I had it on a coffee table about 1.5 meters from the sofa and in very quiet scenes I could hear the fan over the dialogue. When I moved it further back or mounted it higher, it bothered me less. So if you’re sensitive to noise, plan your setup so the projector isn’t right next to your ears.

Heat output is reasonable; it gets warm but not crazy. I didn’t notice any throttling or dimming over long sessions. The remote is simple and works reliably, although it’s IR-based, so you need to roughly point it at the projector. Overall, comfort is good: easy setup, decent speakers, slightly noisy fan, but nothing that ruins the experience if you position it sensibly.

I obviously haven’t had this projector for years, so I can’t pretend to know how it will hold up long term, but I can comment on the build quality and support so far. The casing feels solid enough for a plastic device. No weird creaks when you pick it up, and the lens mechanism for auto focus hasn’t shown any wobble or misalignment after moving it around quite a bit. The vents seem well placed, and as a few other buyers mentioned, the design does seem to reduce dust getting straight into the lens, which is a plus if you don’t want to clean it constantly.

The LED light source should, in theory, last thousands of hours, which is standard for this type of projector. I’ve done a few longer sessions (3–4 hours straight) and didn’t notice any flickering, colour shift, or obvious issues. The brightness stayed consistent and the unit didn’t overheat or shut down. That’s not a full durability test, but it’s a good sign that the cooling system is doing its job.

One thing that gives a bit of peace of mind is the support and warranty they advertise: 1‑year money-back, 3‑year repair, and “lifetime technical support”. I haven’t had to use the repair service, but I did contact support once to ask about a setting, and they actually replied quickly and in understandable English, which is not always the case with random brands. Looking at other user reviews, some people mention getting replacement remotes sent out without drama, which is reassuring.

Realistically, it still feels like a well-made mid-range device, not a tank. I wouldn’t throw it in a backpack without padding or leave it permanently in a damp garage. But for normal home use—moving between rooms, occasional outdoor sessions, ceiling mounting—it feels sturdy enough. If you treat it like electronics and not like a football, I don’t see any obvious weak points that would fail quickly.

On the performance side, this is where the P62 PRO earns its keep. The brightness is genuinely decent. With blinds closed but not blackout, I can watch Netflix comfortably in the afternoon. The colours stay fairly punchy and text is readable. It’s obviously better at night; that’s when it starts to feel more like a proper home cinema. On a 100–120 inch image, movies and series look sharp, and the HDR10 support helps a bit with contrast, especially in darker scenes.

The auto focus and auto keystone are the features I ended up appreciating the most. You drop the projector roughly where you want it, point it at the wall or screen, and within 10–20 seconds it sharpens and squares the image on its own. Even when I had it off to the side on a low table, it still managed to fix the trapezoid effect pretty well. It’s not 100% perfect every single time, but it’s good enough that I almost never had to go into manual settings. For someone who moves the projector between rooms, this saves a lot of fiddling.

The brand talks about “short throw”. In practice, it’s shorter than some older projectors, but I wouldn’t call it a true short-throw like the ultra-short-throw models that sit right under the wall. You still need a couple of meters of distance to get a big image. For my smallish living room, it worked fine from around 2.5–3 meters to get roughly a 90–100 inch picture. Just don’t buy it thinking you’ll get a 100" image from 50 cm away—that’s not what this is.

Motion and input lag are okay. For normal movie watching and casual console gaming (PS5, Switch), it’s perfectly acceptable. If you’re into fast competitive shooters and super sensitive to lag, you’ll probably notice a bit of delay compared to a gaming monitor or a high-end TV, but for me and the kids playing Mario Kart and FIFA, it was more than good enough. Overall, picture performance is solid for the price: bright enough, sharp enough, and easy to get looking good without hours of tweaking.

Out of the box, the WiMiUS P62 PRO looks and feels like a step up from the typical no‑name projector. In the box I got the projector, remote, power cable, basic HDMI cable, and a user manual that’s actually readable. No batteries for the remote, which is slightly annoying but pretty standard. Setup took maybe 10–15 minutes including Wi‑Fi and logging into Netflix and Prime.

The projector is native 1080p, and it can handle 4K input, but don’t kid yourself: it’s still outputting 1080p. That said, the image is sharp enough that on a 100–120 inch screen it looks clean and detailed. The advertised 1200 ANSI lumens / “34000 lumens” marketing number is obviously inflated, but practically speaking, it’s bright enough for evening viewing with lights dimmed and still usable with blinds closed during the day. In direct sunlight, like any projector, it struggles, so don’t expect miracle performance at noon in a bright room.

What stands out on the feature side is the smart OS with official Netflix, Wi‑Fi 6, two HDMI ports, two USB ports, and Bluetooth 5.2 both ways. So you can:

• Run Netflix/Prime/YouTube directly on the projector
• Connect PS5, Switch, or a PC over HDMI
• Use it as a Bluetooth speaker from your phone
• Send audio to a Bluetooth soundbar or headphones

In daily use, I’d describe it as a projector that tries very hard to be a TV replacement. For films and casual gaming it does the job. If you’re a competitive gamer chasing ultra-low input lag, this isn’t the perfect tool, but for normal console gaming it’s fine. For someone who wants to just plug it in and stream Netflix without extra boxes, it actually delivers on that promise, which is more than I can say for some cheaper Android projectors I’ve tried.

The main reason I went for this model was the official Netflix support and built-in apps. On that point, it delivers fairly well. There’s a proper Netflix app, plus Prime Video, YouTube, and an app store with some other services. You don’t need a Fire Stick or Chromecast to get going, which is nice if you want a clean setup or plan to move it between rooms. I logged into my accounts once and they stayed connected without weird logouts or crashes so far.

Wi‑Fi 6 support sounds fancy, but in real life it just means streaming is stable and I haven’t had buffering issues on a decent fibre connection. 4K content from Netflix obviously gets downscaled to 1080p, but it still looks sharp. I also tried screen mirroring from my phone; it works, but like with most projectors, it’s a bit hit-and-miss with DRM content (some apps block casting properly). For serious watching, I just use the native apps or plug in my PS5 or laptop via HDMI.

The two-way Bluetooth 5.2 is genuinely useful. You can:

• Use the projector as a Bluetooth speaker for your phone
• Send audio from the projector to a Bluetooth soundbar or headphones

As a “TV replacement”, it gets pretty close for people who mostly watch streaming content in the evening. The OS is not as polished as a high-end smart TV—menus can be a bit clunky and not every app in the store is great—but it’s usable. I didn’t run into major bugs or crashes. If you’re expecting Apple TV smoothness, you’ll be disappointed; if you just want to open Netflix and hit play without extra devices, it gets the job done.